tascam.comtascam.jptascam-ca.comfr.tascam-ca.comtascam.cn


Products :: PC audio interface :: US-366

US-366 - USB2.0 Audio Interface with DSP mixer

US-366 SPECIFICATIONS

  US-366 US-322
Supported sampling frequency 44.1/48/88.2/96/176.4/192kHz 44.1/48/88.2/96kHz
Supported bit rate 16/24bit (Internal operation is 24bit)
Analog audio Inputs  
MIC IN
(INPUT 1/L, 2/R)
XLR-3-31(1:GND, 2:HOT, 3:COLD), BALANCED
Input impedance 2.2kohms
Nominal input level
(INPUT:MAX)
-65dBu
Nominal input level
(INPUT:MIN)
-22dBu
Maximum input level
(INPUT:MIN)
-6dBu
LINE IN
(INPUT 1/L, 2/R)
6.3mm(1/4") TRS-jack(T:HOT, R:COLD, S:GND), BALANCED
Input impedance 15kohms(LINE)/1Mohms(GUITAR)
Nominal input level
(INPUT:MAX)
-39dBu(LINE)/-55dBV(GUITAR)
Nominal input level
(INPUT:MIN)
+4dBu(LINE)/-12dBV(GUITAR)
Maximum input level
(INPUT:MIN)
+20dBu(LINE)/+4dBV(GUITAR)
LINE IN
(LINE I/O 3-4)
RCA pin-jack
(When set to "INPUT" at LINE I/O switch)
-
Input impedance 15kohms -
Nominal input level -10dBV -
Maximum input level +6dBV -
Analog audio outputs  
LINE OUT
(LINE OUT 1/L, 2/R)
6.3mm(1/4") TRS-jack(T:HOT, R:COLD, S:GND), BALANCED
Output impedance 100ohms
Nominal output level +4dBu
Maximum output level +20dBu
LINE OUT
(US-366:LINE I/O 3-4)
(US-322:LINE I/O 1-2)
RCA pin-jack
(When set to "OUTPUT" at LINE I/O switch)
Output impedance 200ohms
Nominal output level -10dBV
Maximum output level +6dBV
Digital audio inputs  
COAXIAL
(DIGITAL IN)
RCA pin-jack
(When set to "COAXIAL" at DIGITAL IN switch)
-
Format IEC60958-3(S/P DIF) -
OPTICAL
(DIGITAL IN)
TOS (JEITA RC-5720C)
(When set to "OPTICAL" at DIGITAL IN switch)
-
Format IEC60958-3(S/P DIF) -
Digital audio outputs  
COAXIAL
(DIGITAL OUT)
RCA pin-jack -
Format IEC60958-3(S/P DIF)/ IEC60958-4(AES/EBU)* -
OPTICAL
(DIGITAL OUT)
TOS (JEITA RC-5720C) -
Format IEC60958-3(S/P DIF)/ IEC60958-4(AES/EBU)* -
  *Output format can be selected ”S/P DIF” or ”AES/EBU” on INTERFACE tab of DSP mixer.
PHONES  
Connector 6.3mm(1/4") stereo phone jack
Maximum output level 18mW+18mW or more(THD+N 0.1% or less, 32ohms loaded)
USB  
Connector USB B type 4-pin
Format USB2.0 HIGH SPEED mass storage class
REMOTE  
Connector 2.5mm TRS-jack -
Supported protcol Dedicated protocol for RC-3F
(Mackie Control or HUI emulation)
-
Power USB bus powered (5V, Max 500mA)
Power consumption 2.5W
Dimensions 140(W)×42(H)×140(D)mm
Weight 500g
Operating temperature 5-35˚C

 

Audio performance
ADC chip set dynamic range 102dB *1
DAC chip set dynamic range 106dB *2
Frequency response  
Mic preampr 10Hz to 68kHz, +0.5/-3.0dB
MIC IN to LINE OUT 10Hz to 68kHz, +0.5/-3.0dB 10Hz to 40kHz, +0.5/-3.0dB
MIC IN to PHONES 10Hz to 30kHz, +0.5/-1.0dB
THD 0.0045% or less *3
S/N ratio 98dB or more *4
EIN -120dBu or less *5

 

Operating system requirements
Windows
OS Windows XP(32-bit SP3, 64-bit SP2), Windows 7(32-bit SP1, 64-bit SP1), Windows 8.0(32-bit, 64-bit), Windows 8.1(32-bit, 64-bit)

* For further information of the latest OS version, please click here.
DRIVER ASIO2.0, WDM(MME)
Macintosh
OS Mac OS X Snow Leopard(10.6.8), OS X Lion(10.7), OS X Mountain Lion(10.8), OS X Mavericks(10.9)

* For further information of the latest OS version, please click here.
DRIVER Core Audio

*1 FS=48kHz, A-Weight
*2 FS=44.1kHz, A-Weight
*3 US-366:MIC IN to LINE OUT, INPUT 1/2 knobs at MIN position, FS=176.4/192kHz, JEITA
US-322:MIC IN to LINE OUT, INPUT 1/2 knobs at MIN position, FS=88.2/96kHz, JEITA
*4 US-366:MIC IN to LINE OUT, INPUT 1/2 knobs at MIN position, FS=176.4/192kHz, JEITA
US-322:MIC IN to LINE OUT, INPUT 1/2 knobs at MIN position, FS=88.2/96kHz, JEITA
*5 US-366:MIC IN to LINE OUT, INPUT 1/2 knobs at MAX position, FS=176.4/192kHz, JEITA
US-322:MIC IN to LINE OUT, INPUT 1/2 knobs at MAX position, FS=88.2/96kHz, JEITA