=============================================================================================================
Most recent information
-------------------------------------------------------------------------------------------------------------
The latest driver and firmware versions for these units are as follows.

Windows
    Driver  : 1.02 (No new update)
    Firmware: 1.08 (Now update from version 1.07)

Mac OS X
    Driver  : 1.31 for macOS Sierra (only)       (No new update)
              1.30rc4 (OS X EL Capitan only)     (No new update)
              1.01 for OS X (including Yosemite) (No new update)
    Firmware: 1.08 (Now update from version 1.07)

We request that you always use the latest versions of the unit software/firmware.
For information about the latest firmware/software, check the TEAC Global Site (http://teac-global.com/)
-------------------------------------------------------------------------------------------------------------
Important Notice
-------------------------------------------------------------------------------------------------------------
Whenever updating drivers, previous drivers for this product should be uninstalled first.
Please turn on the unit (UH-7000) after the computer is turned on.
=============================================================================================================

<< New functions >>
-------------------------------------------------------------------------------------------------------------
Additions in version 1.07 (Firmware)

Changed how the LINK LINE function operates.
A new item "LINK LINE" button has been added to the INTERFACE tab of the Mixer Panel. When the LINK LINE
feature is unneeded, the unit's LINK LINE button can be disabled, so the button functions as a dedicated 
Phantom ON/OFF control.
To use the unit's LINK LINE button, the Mixer Panel INTERFACE tab setting must be set to "Enable". 
The actual LINK LINE function is turned ON and OFF from the button on the unit, and this now requires the 
button to be held for just over one second before releasing. In Stand-Alone mode, the LINK LINE button is 
always disabled.
-------------------------------------------------------------------------------------------------------------



<< Maintenance items >>
-------------------------------------------------------------------------------------------------------------
Fix in version 1.08 (Firmware) 

The noise from L Channel of Digital Output (AES/EBU) due to certain operating system has been fixed.
-------------------------------------------------------------------------------------------------------------
Fix in version 1.06 (Firmware)

When operating in Standalone mode, the DIGITAL (AES/EBU) OUT signal format was always constrained to AES/EBU 
mode. In this version, the format selected in the Mixer Panel's DIGITAL OUTPUTS FORMAT will be used after
performing a "Save" operation from the Menu.
-------------------------------------------------------------------------------------------------------------
Fix in version 1.02 for Windows driver

 -The tab with recording details in the Sound Control Panel could not be shown. This has been fixed.
  (CAUTION)
   When using a non-ASIO driver with a recording application, the same sampling rate setting must be used in 
   the Properties settings of both the Recording and Playback tabs of the Sound Control Panel and in the 
   project settings of therecording application.
 -After the Windows 8.1 update (KB 2919355) was installed, if a 24-bit option was selected for "Select the 
  sample rate and bit depth to be used when running in shared mode" while a TASCAM USB audio interface was 
  connected, the computer would restart when a Windows system sound played. This is been fixed.
-------------------------------------------------------------------------------------------------------------
Fix in version 1.01 for Windows driver

 -The LINK LINE operation has been changed. For details see Firmware Version 1.07 description above.
 -When Phantom power was enabled for MIC IN 2, some operations and display within the Mixer Panel MIXER tab
  were incorrect. This has been fixed.
-------------------------------------------------------------------------------------------------------------
Fix in version 1.01 for Mac OS X Driver

The LINK LINE operation has been changed. For details seeFirmware Version 1.07 description above.
-------------------------------------------------------------------------------------------------------------
Fix in version 1.00 for Windows driver

 -The settings available for the "Sample Clock source" in the INTERFACE tab of the Mixer Panel were 
  previously limited to just "Automatic". This selector can now be set to "Internal" as well.
 -In rare cases, when using the Dynamics effects NOISE SUPPRESSOR or LIMITER, turning on the effect could 
  result in unexpectedly low signal level in that channel. This problem has been fixed.
-------------------------------------------------------------------------------------------------------------
Fix in version 1.00 for Mac OS X Driver

 -The settings available for the "Sample Clock source" in the INTERFACE tab of the Mixer Panel were 
  previously limited to just "Automatic". This selector can now be set to "Internal" as well.
 -In rare cases, when using the Dynamics effects NOISE SUPPRESSOR or LIMITER, turning on the effect could 
  result in unexpectedly low signal level in that channel. This problem has been fixed.
 -When changing the Mixer Mode from the Mixer panel's INTERFACE tab between "Stereo Mix" and "Multitrack"
  modes, the audio outputs from the LINE OUTPUTS and DIGITAL OUTPUTS may become different to the settings
  shown in the Mixer Panel's MIXER tab. This problem has been fixed.
-------------------------------------------------------------------------------------------------------------