UH-7000
HDIA Mic Preamp/USB Audio Interface
The UH-7000 is a professional-grade mic preamp/audio interface that extensively pursues low noise and high sound quality. Not only can it be used as a 4IN/4OUT interface in a DAW production environment, it can also be used as a standalone mic preamp/ADDA converter.
A newly-designed HDIA mic preamp was installed in order to establish hardware with low noise and high sound quality.
The result is a high-level audio performance of −128dBu EIN, a 117dB signal-to-noise ratio and distortion ratio of 0.0009% or less.
Upgrade Your Audio Interface special offer and pricing. Click here for more information.
Sturdy full-metal body focused on stability
The most careful of consideration was poured into the parts used, which include the BurrBrown PCM4220 ADC/PCM1795 DAC and its usage of thin film metal resistors, and the installment of a TCXO clock generator with +/−1ppm precision.
The UH-7000 comes in a half-rack size, making it easy to be setup around studio consoles and work desks. The unit has a full-metal body, with thick aluminum panels utilized for the front and the sides in order to increase stability. Even when it comes to the operational elements, a large aluminum volume knob has been employed to ensure users can make precise adjustments.
Consumer product, professional design
The UH-7000 is a mic preamp /audio interface that will turn the production tasks carried out in a private studio of composers, musicians, and recording engineers into a higher-level production environment.
- To stay up to date with the latest driver versions, no CD-ROM or other media is included with the package. Users should download and use the latest drivers from our website.
- When operating at 88.2kHz or 96kHz, only one of the effects (dynamics or send) can be used.
- When operating at 176.4kHz or 192kHz, no effects can be used.
- During standalone operation, the built-in DSP mixer settings cannot be changed.
- Even being use in the standalone mode for micpre, output signal go through internal digital circuit.
- Turning LINK LINE OFF with the button will cause the signal level at the ANALOG (BALANCED) OUTPUT L/R connectors to revert to full line level loudness. When turning the LINK LINE OFF, check and adjust the levels on the currently playing audio and connected monitoring equipment first.
HDIA mic preamps capture detailed nuances
The High Definition Instrumentation Architecture (HDIA) mic preamp maximizes high specifications that produce the lowest noise. Parts were selected through repeated listening tests in order to confirm high-performance in both numerical ratings and actual audio quality. The instrumentation amplifier method requires a large number of parts and labor, therefore it is rarely used in ordinary audio equipment. Designed with a circuit that is used not only for professional audio equipment but also in measurement devices that handle highly detailed signals, the UH-7000 is capable of capturing the finest expressive nuances for all musical performances.
Excellent input audio circuit specifications
The analog audio input circuit was designed to achieve low noise and high audio quality throughout the entire signal. Key parts only made the cut after many intense listening tests. Everything from the film capacitors for improved noise performance to the thin film metal resistors and others.
Equivalent Input Noise (EIN): −128 dBu
Audio equipment generates a small amount of voltage even when all input/outputs are disconnected. This noise is calculated as equivalent input sound pressure, most commonly known as equivalent input noise (EIN). Signals at levels lower than this value are masked. -128 dBu represents the smallest signal level the UH-7000 can actually handle.
Signal-to-noise (S/N) ratio: 117 dB (mic to AD converter)
The signal-to-noise (S/N) ratio is a logarithmic value that expresses the amount of noise in comparison to the signal. As a value that indicates the performance of audio equipment, it is extremely important. As this value increases, the amount of noise decreases.
Total harmonic distortion (THD): 0.0009% or less (mic to AD converter)
With no distortion being the ideal, this value expresses the distortion (harmonic content) from the circuit. As this value decreases, the amount of distortion also decreases. Most other USB audio interfaces cannot reach THD levels this low.
Frequency Response: 20 Hz to 80 kHz, +0.005 dB/−0.16 dB (mic preamp at all sampling frequencies)
The frequency response used for audio equipment expresses the sound pressure frequency characteristics. Since this showcases how each frequency of the input audio (sound pressure amplitude) varies, it is often shown as a graph. When expressed numerically, the frequency range and amplitude variation values are used. The ideal value is a straight line graph from the lowest frequency to the highest frequency. The closer the response is to being flat, the more accurately the characteristics of the source sound are maintained. People tend to focus on the frequency range, but the amplitude variation is very important. For example, "20 Hz–20 kHz, +/−1 dB" is closer to being flat than "20 Hz–20 kHz, +/−6 dB".
Equivalent Input Noise (EIN): −128 dBu
Audio equipment generates a small amount of voltage even when all input/outputs are disconnected. This noise is calculated as equivalent input sound pressure, most commonly known as equivalent input noise (EIN). Signals at levels lower than this value are masked. -128 dBu represents the smallest signal level the UH-7000 can actually handle.
Signal-to-noise (S/N) ratio: 117 dB (mic to AD converter)
The signal-to-noise (S/N) ratio is a logarithmic value that expresses the amount of noise in comparison to the signal. As a value that indicates the performance of audio equipment, it is extremely important. As this value increases, the amount of noise decreases.
Total harmonic distortion (THD): 0.0009% or less (mic to AD converter)
With no distortion being the ideal, this value expresses the distortion (harmonic content) from the circuit. As this value decreases, the amount of distortion also decreases. Most other USB audio interfaces cannot reach THD levels this low.
Frequency Response: 20 Hz to 80 kHz, +0.005 dB/−0.16 dB (mic preamp at all sampling frequencies)
The frequency response used for audio equipment expresses the sound pressure frequency characteristics. Since this showcases how each frequency of the input audio (sound pressure amplitude) varies, it is often shown as a graph. When expressed numerically, the frequency range and amplitude variation values are used. The ideal value is a straight line graph from the lowest frequency to the highest frequency. The closer the response is to being flat, the more accurately the characteristics of the source sound are maintained. People tend to focus on the frequency range, but the amplitude variation is very important. For example, "20 Hz–20 kHz, +/−1 dB" is closer to being flat than "20 Hz–20 kHz, +/−6 dB".
Audio quality has been fine-tuned through listening evaluations and recording tests
The sound heard does not always match the numerical specifications. Recording tests were repeatedly conducted for this purpose.
| Engineer: | Mr. Akira Fukada dream window inc. |
| Equipment used: | [Microphone]DPA-4006A [HA]Millennia HV-3D(for audio quality comparison) [Recorder] TASCAM DA-3000 etc. |
| Performers: | Ms. Eriko Gomita (piano) Ms. Ayane Shino (guitar) |
Large aluminum input level knobs and 20-segment LED level meters for precise recording
The UH-7000 is fronted with large aluminum input level knobs The smooth-tension knobs of the UH-7000 support extremely fine adjustments. The unit also includes independent 20-segment LED level meters. In combination with the large knobs, recording levels can be adjusted even more precisely.
Switch operation modes between standalone mic pre and audio interface mode
The UH-7000 starts up in mic pre only mode automatically when not connected to a computer. This unit is an ideal choice as a mic preamp for a master recorders such as the DA-3000.
High precision clock TCXO used to realize stable digital signal control
The clock generator can heavily influence digital signal quality; therefore the UH-7000 is built with a temperature-compensated crystal oscillator (TCXO). This oscillator has a higher precision than the crystal oscillators (XO) used in ordinary equipment. The timing clock uses a crystal oscillator that governs digital signals, but the frequency generated varies according to the temperature. In contrast, a TCXO includes a temperature compensation circuit that has exactly the opposite temperature characteristics of the crystal oscillator. These temperature characteristics guarantee stable clock generation. Compared to the norm, +/−100ppm precision (4.8 Hz at 48 kHz) produced from a standard crystal oscillator, the UH-7000 reaches +/−1ppm precision (0.048 Hz at 48 kHz).
Outstanding AD/DA converter performance with professional studio input/output solutions
The internal circuitry is furnished with Burr-Brown's impeccably pure PCM4220 AD converter. This converter uses a high performance chip that was developed specifically for professional audio and boasts a dynamic range of 123 dB (−60dB input, A-weighted) in isolation. Audio signals digitized by the PCM4220 can be sent via USB to the computer or output from the XLR AES/EBU digital output jacks. For digital-to-analog conversion, the UH-7000 uses the equally impressive Burr-Brown PCM1795. The digital inputs and outputs support transmission in IEC60958-4 (AES/EBU) and IEC60958-3 (S/PDIF) formats. Even when used in standalone micrpre mode, the output signal runs through the internal digital circuit.
Link line function enables volume control of powered monitors
The link line function allows the line output volume to be adjusted using the headphones volume knob. This allows users to connect the unit directly to powered speakers and adjust the monitoring volume without need for a mixer or other equipment.
When the headphones and line output volumes are linked, be careful with the volume when using both headphones and speakers.
Turning LINK LINE OFF with the button will cause the signal level at the ANALOG (BALANCED) OUTPUT L/R connectors to revert to full line level loudness.
When turning the LINK LINE OFF, check and adjust the levels on the currently playing audio and connected monitoring equipment first.
When the headphones and line output volumes are linked, be careful with the volume when using both headphones and speakers.
Turning LINK LINE OFF with the button will cause the signal level at the ANALOG (BALANCED) OUTPUT L/R connectors to revert to full line level loudness.
When turning the LINK LINE OFF, check and adjust the levels on the currently playing audio and connected monitoring equipment first.
Confirmed compatibility with major DAW softwares
Thorough testing has been completed on all major DAW applications.
TASCAM Professional Software: SONAR X3
Avid: Pro Tools 11
Steinberg: Cubase
Ableton: Live 9
TASCAM Professional Software: SONAR X3
Avid: Pro Tools 11
Steinberg: Cubase
Ableton: Live 9
DEMO Sounds
It is the sound source recorded by "UH-7000" in the above-mentioned recording examination.
Features at a Glance
- Supports 24-bit/192kHz USB transmission and AD/DA conversion
- Support for Mac and Windows operating systems
- 4-in/4-out audio streaming from a PC connected via USB 2.0
- Burr-Brown PCM4220 AD converter
- Burr-Brown PCM1795 DA converter
- HDIA mic preamps: –128dB EIN
- Thin film metal resistors with outstanding noise performance
- High audio quality film capacitors with low distortion
- Low latency monitoring through the DSP mixer
- DSP mixer can be switched between multitrack and stereo mix modes
- DSP mixer enables independent adjustment of recording and monitoring levels
- Line or digital outputs can be selected using the DSP mixer
- DSP dynamics effect can be applied to inputs, outputs or the master (compressor, noise suppressor, de-essoer, exciter, EQ, limiter/low cut)
- DSP REVERB (hall, room, live, studio, plate) send effect is perfect for monitoring when recording
- Link line function enables volume control of powered monitors
- Single punch MIXER PANEL button
- Strong, highly durable aluminum body
- Large INPUT level knobs enable precise adjustment of input levels
- Two 20-segment LED level meters
- Standard TRS headphones output jack - 45mW/channel output
- +48 Phantom power supply
- Two balanced analog XLR jacks for both input and output
- Professional output specifications (maximum output level: +24 dBu)
- Two balanced analog TRS input jacks
- XLR digital input and output jacks support AES3-2003/IEC60958-4 (AES/EBU) and IEC60958-3 (S/PDIF) formats
- Three-pronged inlet power cable
- Half-rack size
- Confirmed operation with major DAW software, including Sonar X3, ProTools, Cubase and Live
- RoHS Compliant
