CD-200BT
Professional CD Player with Bluetooth Receiver
Play CDs and Stream Audio from Bluetooth Devices with the aptX Codec
- aptX®, AAC and SBC codecs are supported
- High-quality CD drive designed for audio
- Four playback modes (continuous, shuffle, program and single)
- Repeat playback function (all or single)
- Switch between display of track elapsed time, track and disc remaining time (audio CD)
- +-14% pitch control function(audio CD/data CD)
- RCA analog outputs and COAXIAL/OPTICAL digital outputs
- Wireless remote controller with 10-key included
- Playback media: CD, CD-ROM, CD-R, CD-RW (12cm / 8cm)
- Bluetooth version: v3.0
- Power consumption: 8W
- Dimensions (W×H×D): 481 × 94.5 × 298 mm
- Weight: 4.5 kg (9.92 lb)
- CD-200BT × 1
- Wireless remote control unit (RC-CD200BT) × 1
- AA batteries for the remote control unit × 2
- A rack-mounting screw kit × 1
- A warranty card × 1
- Owner's manual × 1
- TASCAM ID registration guide × 1
Stream Music Wirelessly from Bluetooth® Devices
With a front-panel-mounted antenna for maximum wireless reliability, the CD-200BT supports audio file playback from a variety of Bluetooth® compatible devices. And virtually any audio file type is supported — if your Bluetooth® device can play the file back by iTunes, Windows Media Player, or other player apps, it can be streamed wirelessly to the CD-200BT. With no additional wires needed to stream music from compatible audio sources, the CD-200BT allows for fast and easy audio playback.
Note: The transmitting device must support Bluetooth® transmission.
Register Bluetooth® Devices in Advance for Faster Source Switching and Operation
Bluetooth® audio playback requires pairing a transmitter to your receiver. Normally, only one Bluetooth® device and be paired at a time, but the CD-200BT’s device selection function allows you to pair multiple transmitting devices. By pairing in advance, you can switch seamlessly between different Bluetooth® transmission devices for playback with minimal connectivity interruption (only one device can be used for playback at a time). You can check the connection status of your transmitting devices directly from the CD-200BT for faster troubleshooting and easier system management.
High Quality Wireless Audio Playback with aptX® Codec
The CD-200BT supports multiple Bluetooth® transmission codecs to ensure high-quality audio playback from any transmitting device. The CD-200BT supports the A2DP (Advanced Audio Distribution Profile) for high-quality music playback, and SBC (Sub Band Codec), a standard A2DP codec. In addition, it supports the aptX® codec, making high quality wireless audio playback possible. The aptX® codec also has an error recovery function, so your audio is much less likely to be interrupted compared to ordinary SBC transmission.
Additional Features
High-Quality CD Drive
All models in the CD-200 series have the same highly-regarded and reliable CD drive. We have achieved higher dependability, quality and reputation.
Comprehensive Audio Format Support, with 10-second Skip Prevention
The CD-200BT is perfect for any install application where audio format versatility is needed, with CD- drive support for CD-DA, WAV, MP3, and MP2 audio files (wireless Bluetooth® playback supports any file type your transmitting device can play). The 10-second shockproof memory prevents skipping caused by excessive bass, unexpected bumps and jolts, and other causes. Data stored in the CD-200BT's memory can be played back without skipping, helping you avoid distracting playback interruptions.
Features at a Glance
- Up to eight Bluetooth® transmission devices can be paired at a time for quick and easy switching
- The name of the transmission device currently being used for playback can be displayed
- aptX®, AAC and SBC codecs are supported
- SCMS-T is supported using Bluetooth® (A2DP), so audio with content protection can be received
- Bluetooth® antenna in the front for stable Bluetooth® connections
- High-quality CD drive designed for audio
- 10-second shockproof memory prevents skipping from vibrations and other causes
- CD drive supports playback of CD-DA and WAV/MP3/MP2 files (data CD)
- Supports CD text and ID3 tags, so text information, including artist, album and track names, can be shown
- Four playback modes (continuous, shuffle, program and single)
- Repeat playback function (all or single)
- Folder repeat playback (data CD)
- Switch between display of track elapsed time, track and disc remaining time (audio CD)
- +-14% pitch control function (audio CD/data CD)
- Intro Check function can be used to play the first 10 seconds of songs in order (audio CD/data CD)
- RCA analog outputs and COAXIAL/OPTICAL digital outputs
- Stereo mini-jack input on the front for portable audio devices
- 2U EIA rack-mount size
- Wireless remote controller with 10-key included
- Paring and device selection can be conducted with the included wireless remote control
- Headphone output
Find a Local Dealer
LEARN MOREYou might also like
Spec Description
Playback media | CD, CD-ROM, CD-R, CD-RW (12cm / 8cm) |
Playback format | |
CD-DA | Stereo, 44.1kHz, 16-bit |
WAV | Stereo, 8k / 11.025k / 12k / 16k / 24k / 32k / 44.1k / 48k Hz, 8/16-bit |
MP2 | Stereo, 32k / 44.1k / 48k Hz, 32k to 384k bps |
MP3 | MPEG1 Audio Layer III, 32k / 44.1k / 48k Hz, 32k to 320k bps, VBR |
Pitch control | ±14% |
Analog audio input | |
AUX | |
Connector | 1/8" (3.5mm) Stereo mini jack × 1 |
Input impedance | 22kΩ |
Nominal input level | –20dBV |
Maximum input level | –4dBV |
Analog audio output | |
UNBALANCED | |
Connector | RCA Pin jack × 1 pair |
Output impedance | 200Ω |
Nominal output level | –10dBV (0.32Vms) |
Maximum output level | +6dBV (2.0Vms) |
Digital audio output | |
COAXIAL | |
Connector | RCA Pin jack × 1 |
Output impedance | 75Ω |
Format | IEC60958-3 (S/PDIF) |
OPTICAL | |
Connector | TOS (JEITA RC-5720C) × 1 |
Format | IEC60958-3 (S/PDIF) |
Headphone out | |
Connector | 1/4" (6.3mm) Stereo phone jack × 1 |
Maximum output level | 20mW + 20mW or more (THD+N 0.1% or less, into 32Ω loaded) |
Power | AC120V, 60Hz |
Power consumption | 8W |
Dimensions (W×H×D) | 18.9" × 3.7" × 11.7" / 481 × 94.5 × 298 mm |
Weight | 9.92 lbs. / 4.5 kg |
Operating temperature | 41˚F to 95˚F / 5 ˚C to 35˚C |
Inclination of installation | 5˚ or less |
Backup Memory Items | Elapse time / Title display setting (CD), Playback mode (CD), Program (when loaded), Current folder (when CD loaded), Current source, Repeat playback function setting (ON/OFF), Pitch control (ON/OFF, CD) Pitch control value (CD) |
Standard accessories | Wireless remote controller (RC-CD200iL), AA battery × 2, Rack mounting screw, Warranty card, Owner's manual |
Audio performance
Frequency response | 20Hz to 20kHz, ±1dB (playback, JEITA) |
Distortion | 0.01% or less (during playback, JEITA) |
S/N ratio | 90dB or more (playback, JEITA) |
Dynamic range | 90dB or more (playback, JEITA) |
Channel separation | 90dB or more (playback, JEITA) |
CD-200 Series Comparison Chart
Model | CD-200 | CD-200SB | CD-200BT | CD-200iL |
Source | CD | CD, SD, USB flash (SD/SDHC) |
CD, Bluetooth (SBC, AAC, aptX) |
CD, iPod dock (Lightning/30-pin) |
Supported Formats | ||||
CD-DA | Stereo, 44.1kHz/16-bit | |||
WAV | 8k / 11.025k / 12k / 16k / 22.05k / 24k / 32k / 44.1k / 48k Hz, 16/24-bit | |||
MP3 | 32k / 44.1k / 48k Hz, 32k to 320k bps, VBR | |||
MP2 | – | 32k / 44.1k / 48k Hz, 32k to 384k bps | ||
AAC | – | Yes* (see below) | – | |
Analog audio input | – | 1/8" (3.5mm) Stereo mini × 1 | ||
Analog audio output | ||||
Unbalanced | RCA × 1 pair | |||
Balanced | – | XLR 3-32 × 1 pair | – | |
Digital audio output | ||||
Coaxial | RCA × 1 | |||
Optical | TOS × 1 | |||
Headphone out | 1/4" (6.3mm) Stereo phone jack × 1 | |||
Pitch control | ±12.5% | ±14% | ±14% | ±14% |
Dimensions (W×H×D) | 18.9" × 3.7" × 11.7" / 481 × 94.5 × 298 mm | |||
Rack mount size | 2U | |||
Weight | 9.3 lbs. / 4.2 kg | 10.4 lbs. / 4.7 kg | 9.9 lbs. / 4.5 kg | 11.5 lbs. / 5.2 kg |
* 8k / 11.025k / 12k / 16k / 22.05k / 24k / 32k / 44.1k / 48k Hz, 8k to 320kbps
Documents
Manuals
Owner's Manual | 05-12-2023 |
|
---|
Spec
CAD outline (PDF) | 05-17-2013 |
|
|
---|---|---|---|
CD-200BT DXF file | 05-17-2013 |
|
Catalogs
TASCAM System Design Guide for Audio Installation, 2024 | 01-18-2024 |
|
---|