TASCAM DA-6400 CONTROL
DA-6400 REMOTE CONTROL APP
TASCAM DA-6400 Control for iPad is an iOS app allowing Apple's iPad to control the TASCAM DA-6400 64-channel Digital Multitrack Recorder. Using your Wi-Fi network, this iOS app controls and monitors the condition of the DA-6400 or DA-6400dp.
Monitor the Condition of the DA-6400
There are two types of time counters, allowing for flexible time information monitoring such as synchronous monitoring of the Elapsed Time and Timecode Input.
Control Remotely from the Best Position
Where to download
Monitoring and controlling the DA-6400/DA-6400dp from iPad
Monitor the status of the DA-6400
The control app monitors the record/play levels and peak levels for all 64 channels, marking track numbers if they overload. The Master Clock status and timecode location are also displayed. Remaining media capacity can also be confirmed.
There are two time counter displays, allowing for flexible time information monitoring such as simultaneous monitoring of the Elapsed Time and Timecode Input.
Control the recorder wirelessly from any position you choose
When the DA-6400 is installed in an inconvenient location such as a machine room, it can be controlled remotely from the performance space via Wi-Fi. In addition to basic transport operations like Record, Play, Take Skip, and Backward/Forward, the operator can also set and locate marker points.
A complete command center for the DA-6400
Monitor the Levels of all 64 Channels
The app is equipped with a 64-channel level meter, making it possible to monitor levels. When a level overload occurs, the bar meter changes to red, and a pop-up display of the Channel number appears above the meter.
Transport Control
In addition to basic Record, Play, Take Skip, and Backward/Forward operations, marker Set and Skip buttons are provided.
Monitor Master Clock Synchronization, Input Timecode, and HOST Connection Status (Connection to DA-6400)
The panel warns if clock source is lost, and confirms that the app is still reading the DA-6400
Two Types of Time Counters
There is a Main and Sub-Counter for Time Display, making it possible to display multiple time formats. For example, monitor both the Elapsed Time and Input Timecode.
Select Any Take from the Take List
Tap the TAKE LIST button to bring up a pop-over display of the Take List, and then select the desired Take.
Uses your Wi-Fi network
The app communicates with the DA-6400 via a Wi-Fi network, so monitoring and control can be performed from an optimal location even when the DA-6400 is installed in a rack case.
* A Wi-Fi router is needed for Wi-Fi connection. Connect the DA-6400 to your router and use its IP address to find it from the app.
Panel Lock Function for Preventing Accidental Operation with the Application
By locking out the control, accidental trasport operations can be prevented during recording or playback. Swipe with two fingers to the left (while the panel is unlocked) to lock Transport Button operation. Swipe with two fingers to the right (while the panel is locked) to unlock the Transport Button operation.
Display and Set Record Arming and Input Monitor
It is possible to configure Record Arming and Input Monitor settings for each channel.
Features at a Glance
- Monitor the Levels of 64 Channels
- Transport Control Possible
Record, Play, Skip, Backward/Forward
MARK Set, MARK Skip
- Display and Set the Rec Function / Input Monitor
- Master Clock Synchronization, Input Timecode, and HOST Connection Status (Connection to DA-6400) Monitoring
- Panel Lock Function for Preventing Accidental Operation with the Application
- Two Types of Time Counter Displays
Possible to display the following information
Elapsed, Remain, Total elapsed, Total remain, Internal timecode, Timecode input
- Media Remaining Capacity Display
- Select any Take from the Take List
[Updated] Information about iOS 17, iPadOS 17 Update
Learn More
