IF-DA64
64-in/64-out Dante interface card
Supporting models : TASCAM Sonicview 24XP / TASCAM Sonicview 16XP / DA-6400 / DA-6400dp
The IF-DA64 is an optional 64-in/64-out Dante interface card for the TASCAM expansion slot system. Equipped with primary and secondary ports for redundancy.
- Up to 64-in/64-out (48kHz/44.1kHz) or up to 32in/32out (96kHz/88.2kHz) Dante inputs and outputs
- Redundancy (primary/secondary)
- RJ-45 connector
- Compatible with the TASCAM Expansion Slot system
- Sampling Frequency 44.1k/48kHz : 64 channels max
- Sampling Frequency 88.2k/96kHz : 32 channels max
- Connector : RJ-45
- Transmission protocol : Dante
- Gigabit Ethernet standard : 1000BASE-T (IEEE 802.3ab)
- IF-DA64 × 1
- Owner's Manual with Warranty × 1
Features at a Glance
- Up to 64-in/64-out (48kHz/44.1kHz) or up to 32in/32out (96kHz/88.2kHz) Dante inputs and outputs
- Redundancy (primary/secondary)
- RJ-45 connector
- Compatible with the TASCAM Expansion Slot system
Find a Local Dealer
LEARN MOREYou might also like
Spec Description
Formats and channels | |
Sampling Frequency | |
44.1k/48kHz | 64 channels max. |
88.2k/96kHz | 32 channels max. |
Input/output ratings | |
PRIMARY/SECONDARY connectors | |
Connector | RJ-45 |
Transmission protocol | Dante |
Gigabit Ethernet standard | 1000BASE-T (IEEE 802.3ab) |
Cables | category 5e or faster. |
Dimensions | 107(W) × 34(H) × 156.8(D) mm (including protrusions) |
Weight | 139g |
Information
Update Information
Latest version info | |
Firmware | Ver001B |
Dante firmware | V1.2.0 |
Dante firmware V1.2.0
- SMPTE2110-30 has been supported.
Dante Domain Manager (DDM) v1.1 or later is required to use SMPTE 2110-30 audio.
Firmware Ver001B
- Operation stability has been improved.
Documents
Manuals
Owner's Manual | 02-15-2018 |
|
|
---|---|---|---|
Owner's Manual Addendum | 01-26-2016 |
|
Spec
CAD outline (PDF) | 05-18-2023 |
|
|
---|---|---|---|
CAD outline (DXF/PDF) | 05-18-2023 |
|
|
Specifications | 04-11-2016 |
|
Catalogs
TASCAM System Design Guide for Audio Installation, 2024 | 01-18-2024 |
|
---|
Firmware / Software
Instructions
Dante Module Firmware Update Procedures (IF-DA64) | 02-10-2020 |
|
|
---|---|---|---|
Release Note (IF-DA64) (English) | 02-10-2020 |
|
Other Firmware
Firmware Ver001B, Dante Module Firmware V1.2.0 (IF-DA64) | 02-10-2020 |
|
---|
Select your country or region.
Asia, Oceania
Middle East & Africa