ML-32D
32-channel Analog/Dante Converter
The TASCAM ML-32D is a professional Dante-focused converter made specifically to insert or extract analog audio into or out of a Dante (Digital Audio Network Through Ethernet) network using external breakout devices that utilize Sub-D format connectors.
The ML-32D has four D-Sub inputs and four D-Sub outputs, which can easily be connected to any of the many devices that utilize D-Sub connectors such as microphone preamplifiers, large and small format console mixers, audio interfaces, amplifiers, and euro block connector devices. This simple, yet elegant, solution enables audio to be quickly and easily inserted into – or extracted from – the Dante audio stream.
Dante module firmware V1.2.0.0 now supports SMPTE ST-2110-30, which will enable a smooth IP transmission of PCM digital audio for structuring broadcast systems.
* Audinate's provided Dante Domain Manager (DDM) v1.1 or higher is required for the operation of SMPTE ST 2110-30.
For more information about DDM, please visit Audinate's website.
https://www.audinate.com/products/software/dante-domain-manager/
For further information about Dante, please visit Audinate website below.
https://www.audinate.com/
Dante module firmware V1.2.0.0 now supports SMPTE ST-2110-30, which will enable a smooth IP transmission of PCM digital audio for structuring broadcast systems.
* Audinate's provided Dante Domain Manager (DDM) v1.1 or higher is required for the operation of SMPTE ST 2110-30.
For more information about DDM, please visit Audinate's website.
https://www.audinate.com/products/software/dante-domain-manager/
Primary and secondary connectors enable building a redundant system with a duplex network. Should the primary network route fails the ML-32D automatically switches to the secondary network route. This highly secure system prevents interruption and introduces no noise during the switch.
The ML-32D uses Dante Controller to configure the main unit and to connect to other Dante-compatible devices. Dante Controller enables flexible routing configuration to other Dante-compatible devices.
About Dante Controller
Dante Controller is a free software application released by Audinate.
Download the latest version from Audinate website.
Audinate download page : https://www.audinate.com/products/software/dante-controller
Dante Controller Routing window
Dante Controller Device Config. window
Dante supports AES67, which enables audio connection with systems using AES67 and AES67-compatible protocols including Ravenna.
The front panel is equipped with a signal/overload indicator that enables monitoring of analog input/output signals. The signal indicator turns on when a signal level becomes lower than –60dBFs.
The TASCAM ML-32D features selectable reference level setting from 5 maximum level options: +24dBu, +22dBu, +20dBu, and +18dBu (the standard level is +4dBu) and +15dBu (the standard level is +6dBu), which can accommodate to a variety of purposes including professional use in broadcasting studios, public address systems and recording environments.
Features at a Glance
- 32-channel analog line input/output
- Equipped with Dante interfaces
- Dante primary and secondary connectors support redundancy
- Compatible with SMPTE ST 2110-30
- AES67 is also supported. Possible to connect with AES67-compatible network audios including Ravenna
- Dante Controller enables flexible routing
- Supports up to 96kHz/24bit
- Equipped with a signal/overload indicator that enables level monitoring of analog input/output signals
- 5 selectable reference levels which can accommodate to a variety of scenes including professional usages, public addresses, and usages in broadcasting studios
- Equipped with a STATUS indicator for indicating failures and errors of the device
- Firmware update via a Dante interface is possible
- Equipped with D-sub 25-pin connectors as line input/output connectors
- 1U rack mount size
- Using an optional BO-32DE (D-sub/Euro Block breakout box) enables supporting Euro Block connectors which are optimal for professional usages
- Using an optional BO-16DX/IN and BO-16DX/OUT (D-sub/XLR breakout box) enables supporting XLR connectors which have multiple usages including usage as a stage box.
The Lume Melbourne Van Gogh Experience: Introducing Dante models in immersive digital art gallery
Learn More
