TASCAM DCP CONNECT
Control Software for System Integrators / System Managers
The TASCAM DCP CONNECT is a useful remote control software designed for system integrators/managers to fully configure and control the TASCAM Dante Compact Processor Series. This software allows controlling and managing multiple units of the series all at once. Available free for Windows/macOS/Android/iOS devices.
TASCAM DCP CONNECT comes with a new DEMO Mode in which users are now able to try the app without connecting it to a real unit.
The functions available on the DEMO Mode are:
- Input module control
- Matrix mixer control
- Routing control
- Output module control
- End-user dedicated software TASCAM EZ CONNECT system layout building
Users can access to multiple units by using only one control device, and build-up a small scale system using the Dante Compact Processor Series models only. Just by clicking or tapping the unit name displayed at the top of the screen will allow users to choose which unit to control.
For places such as event spaces, banquet rooms, etc. where input/output routing and audio levels may change depending on the occasion, TASCAM DCP CONNECT offers an efficient configurable solution in which facility managers can monitor the input/output levels and flexibly change settings on a daily basis.
Using an established network, all Dante Compact Processor Series models can be controlled either with a wired or a wireless connection. TASCAM DCP CONNECT works flexibly with Windows, macOS, Android and iOS, allowing users to control the units via iPad or Android tablets as well.
Mic/line input sources can be finely configured by controlling the input modules.
Controllable input module functions:
- Mic input / line input switching
- Phantom power (+48V) ON / OFF (mic input)
- PAD (mic input)
- Mic gain (mic input)
- Compressor
- 4 band parametric EQ
- Auto level control
- Mute
- Fader
- Fader / Mute grouping
Compressor input modules and the 4 band parametric EQ parameters can be both configured on their respective control screens. Users can surf around through both controls screens by clicking/tapping the compressing display or EQ display on the main input channel screen.
Grouping function allows collective level control after mixing; using the ducking function or the ambient noise compensator function will allow for detection of environmental sounds and automatic level adjustments.
Input sources can be chosen and declining levels can be set by using the ducking function. With the ambient noise compensator function, choosing input sources and gain control among others can be done. Touching/clicking the DUCKIN/ANC button on the bottom left of the screen will bring users to see its control screen.
- Ducking
This function detects the level of a mic input and simultaneously turns down the level of the selected output zone. For example, it can be used to make announcements be heard more clearly: the ducking function will automatically lower down the background music level according to the input level of the mic used. - Ambient noise compensator
The ambient noise compensator (ANC) function also detects input source level and automatically configures the level of the selected output zone. Whenever there is fluctuation on the noise level of a field environment, this function will automatically compensate the volume for clearer background music or announcements.
TASCAM DCP CONNECT software allows flexible signal routing of analog inputs, Dante inputs, or the matrix mixer output zones out to analog or Dante outputs.
Using the software to bypass the matrix mixer, the Dante Compact Processor Series can be also be used as simple Dante converter units.
These output modules can be used for line output. Depending on the output equipment the Dante Compact Processor Series is/are connected to, these modules can be finely configured and controlled.
Output module functions:
- 10 band EQ
8 band parametric EQ
High pass filter / low shelving EQ
Low pass filter / high shelving EQ - Delay
- Limiter
- Phase switching
- Mute
- Fader
- Fader / Mute grouping
Output effects such as the 10 band EQ or delay parameters can be all configured through the screen. To configure the settings, touch/click the 10 band EQ display or the delay function display.
Simple configurations and controls can be done by end-users via TASCAM EZ CONNECT control software. Depending on the usage, users can freely decide which modules/controls to display, or hide when unnecessary.
Features at a Glance
- Dedicated control software for the TASCAM Compact Processor Series, designed for system integrators/managers.
- Apt to control multiple Dante Compact Processor models at once
- Allows control of:
Input module effects
Matrix mixer
Input/output routing
Output module effects, etc. - Compatible with Windows/macOS/Android/iOS.
TASCAM DCP CONNECT (Android) control software update to V1.1.2
Learn More
TASCAM DCP CONNECT (Android) control software update to V1.1.2
Learn MoreYou might also like
Information
| Latest version information | |
| Windows | V1.1.1 |
| Mac | V1.1.1 |
| iOS | V1.1.1 |
| Android | V1.1.2 |
- This app can now also be used with 64-bit Android devices.
- When trying to install this app anew on some devices, it would not appear on Google Play and installation would not be possible. This problem has been fixed.
- Operation stability has been improved.
- In Android 9, DCP series products could only be discovered immediately after the app was launched. This has been fixed.
- Operation stability has been improved.
The dedicated APP『TASCAM DCP CONNECT』is available for free download. The APP for iOS/Android is available on App Store/Google Play. For Windows/Mac, the APP can be downloaded from TASCAM website.
