US-1200
USB Audio Interface
The US-1200 is a USB audio interface equipped with 6-channel analog inputs and 2-channel analog outputs. The 4 XLR inputs support acoustic guitar, piano, and other types of recordings in which multi-channel is suitable for, as well as allowing the usage of a dynamic microphone and condenser microphone. The two line inputs support balanced connections, as well as high-impedance connections, allowing guitars and basses to be directly connected and recorded simultaneously.
Upgrade Your Audio Interface special offer and pricing. Click here for more information.
This model has been discontinued in North, Central and South America.
Please check the availability with your local distributors in other areas.
Mic preamps equipped with TASCAM original high sound quality HDDA
TASCAM original HDDA mic preamps, being a component that determines recording sound quality, were chosen after careful parts selection based on listening trials. The differential microphone amplifier circuit operating on a discrete architecture is comprised of parts that optimize sound quality, including the carefully selected transistors. The US-1200 amplifies expressive performance into clear, transparent sounds, in DAW format.
DSP mixer with switchable modes allowing for various applications
The US-1200 is equipped with a DSP mixer that was favorably received when it was installed in the US-366. The DSP mixer has two selectable modes: a multi-track mode optimal for music production and a stereo mix mode perfect for live online broadcasts and video editing. These two modes enable the US-1200 to be used in various situations. Additionally, the DSP effect supports a high-grade recording and audio input, allowing users to add reverse and other spatial effects to monitoring audio.
Easily record anywhere, anytime, by carrying the device around
A rack-mount design, the standard for professional-use devices, was employed, allowing users to install the US-1200 on a commercially-sold rack and to be carried around easily. Using the US-1200 together with a laptop can easily establish a recording system that supports four microphones. The US-1200 is an audio interface that exhibits its true potential when recording acoustic guitar, piano, and other settings that suit multiple microphones.
In order to ensure that the latest version of the driver is used, it has not been included in CD-ROM or other media-devices. Instead, please download the latest driver from TASCAM’s website (DOWNLOAD LINK).
When operating at 88.2k/96kHz, only the dynamic effect or and send effect are available.
Equipped with High-Quality HDDA (High Definition Discrete Architecture) Microphone Preamplifiers
6 Analog inputs for Multi-Channel Recording
Low-Latency Monitoring for Stress-Free Recording
Supports Hi-Res Recording Up To 24 bit/96 kHz
The DSP Mixer Has Two Operational Modes Designed for Music Creation and Podcasting
Multi-track Mode
Multi-track mode facilitates music production. The input sound and monitor mix can be adjusted separately, fine-tuning the balance between recording and playback volumes optimally. Monaural monitoring is also a possibility within the mixer operation.
Stereo-mix Mode
Stereo-mix mode is convenient for internet streaming, live broadcasts or video editing. It is possible to deliver not only input sound but also sound from the PC back to the PC by mixing it inside the US-1200. Applications such as adding announcements while playing background music with the PC and then sending the accumulated track back to the PC.
On-board DSP effects to improve higher level recording and sound input
(The effects cannot be used when recording at 88.2/96 kHz resolutions.)
Insert Effects
Send Effect
When recording, dry vocals can sound impassionate but by applying light reverb, sing gracefully and in the end, achieve a better result.
Features at a Glance
- High-quality HDDA (High Definition Discrete Architecture) mic pre-amps
- Four XLR inputs with +48V phantom power and two TRS ¼" balanced inputs
- INPUT 5/6 supports direct Hi-Z instrument inputs
- INPUT 5/6 supports +4 dBu line level
- 6-IN/2-OUT with audio stream support - USB 2.0 24-bit/96 kHz resolution
- Low-latency monitoring via the DSP mixer
- On-board DSP mixer with 2 operational modes
- On-board digital effects(DSP effects)(DSP effects can use on 44.1/48kHz operating)
- Two TRS analog balanced outputs
- 50mW + 50mW headphone output
- RoHS certified
- EIA 1U rack mount size
[NOTES]
- The driver is not included in the form of a CD-ROM to keep up with the constant software upgrades.
- Please download the latest driver from the website.
Spec description
| Supported sampling frequency | 44.1kHz, 48kHz, 88.2kHz, 96kHz |
| Supported bit rate | 16bit, 24bit |
| Analog audio Inputs | |
| MIC IN 1-4 | |
| Connector | XLR-3-31 (1:GND, 2:HOT, 3:COLD), BALANCED |
| Input impedance | 2.2kohms |
| Rated input level (GAIN knob:MAX) |
-68dBu (0.0003Vrms) |
| Rated input level (GAIN knob:MIN) |
-22dBu (0.0616Vrms) |
| Maximum input level | -6dBu (0.3884Vrms) |
| Headroom | 16dB |
| GUITAR IN 5-6 | when GUITAR/LINE IN switch set to GUITAR |
| Connector | 6.3mm (1/4") TS-jack (T:HOT, S:GND), UNBALANCED |
| Input impedance | 800kohms |
| Rated input level (GAIN knob:MAX) |
-51dBV (0.0028Vrms) |
| Rated input level (GAIN knob:MIN) |
-6dBV (1.995Vrms) |
| Maximum input level | +10dBV (3.162Vrms) |
| Headroom | 16dB |
| LINE IN 5-6 | when GUITAR/LINE IN switch set to LINE IN |
| Connector | 6.3mm (1/4") TRS-jack (T:HOT, R:COLD, S:GND), BALANCED |
| Input impedance | 10kohms |
| Rated input level (GAIN knob:MAX) |
-41dBu (0.0069Vrms) |
| Rated input level (GAIN knob:MIN) |
+4dBu (1.228Vrms) |
| Maximum input level | +20dBu (7.75Vrms) |
| Headroom | 16dB |
| Analog audio outputs | |
| MONITOR OUTUT L/R | |
| Connector | 6.3mm (1/4") TRS-jack (T:HOT, R:COLD, S:GND), BALANCED |
| Output impedance | 100ohms |
| Nominal output level | +4dBu (1.273Vrms) |
| Maximum output level | +24dBu (12.283Vrms) |
| PHONES | |
| Connector | 6.3mm (1/4") stereo phone jack |
| Maximum output level | 50mW + 50mW or higher (THD+N 1% or less, into 32ohms load) |
| USB | |
| Connector | USB B type 4-pin |
| Format | USB2.0 High Speed (480Mbps) |
| Power | Dedicated AC adapter (GPE248-120200-Z) |
| Power consumption | 5.5W |
| Dimensions | 482.6 (W) × 45 (H) × 300.4 (D) mm 19 (W) × 1.8 (H) × 11.8 (D) lb |
| Weight | 2.9kg |
| Operating temperature | 5-35˚C |
| Bundle software | SONAR X3 LE (for Windows only), Ableton Live Lite |
| Audio performance | |
| Frequency response | |
| MIC IN to OUTPUT (BALANCED) |
20Hz to 20kHz, +/-1dB (44.1k/48kHz, JEITA) 20Hz to 40kHz, +/-2dB (88.2k/96kHz, JEITA) |
| LINE IN to OUTPUT (BALANCED) |
20Hz to 20kHz, +/-1dB (44.1k/48kHz, JEITA) 20Hz to 40kHz, +/-2dB (88.2k/96kHz, JEITA) |
| THD | |
| MIC IN to OUTPUT (BALANCED) |
0.01% or less (1kHz sine wave, at maximum input, JEITA) |
| LINE IN to OUTPUT (BALANCED) |
0.01% or less (1kHz sine wave, at maximum input, JEITA) |
| S/N ratio | |
| MIC IN to OUTPUT (BALANCED) |
95dB or higher (gain knob at MIN, JEITA) |
| LINE IN to OUTPUT (BALANCED) |
95dB or higher gain knob at MIN, JEITA) |
| Crosstalk | |
| MIC IN to OUTPUT (BALANCED) |
90dB or more (1kHz) |
| LINE IN to OUTPUT (BALANCED) |
90dB or more (1kHz) |
| Operating system requirements | |
| Windows | |
| OS | Windows XP:32-bit SP3 or later Windows 7:32-bit, 64-bit Windows 8:32-bit, 64-bit Windows 8.1:32-bit, 64-bit |
| Compatible computers | Windows computer with a USB 2.0 port |
| CPU type/speed | 2 GHz or faster dual core processor (x86) |
| Memory | 2GB or more |
| DRIVER | ASIO2.0, WDM(MME)  |
| Macintosh | |
| OS | Mac OS X Snow Leopard(10.6) OS X Lion(10.7) OS X Mountain Lion(10.8) OS X Mavericks(10.9) |
| Compatible computers | Apple Macintosh computer with a USB 2.0 port |
| CPU type/speed | 2 GHz or faster dual core processor |
| Memory | 2GB or more |
| DRIVER | Core Audio |
