US-42B MiNiSTUDIO CREATOR
Podcast USB Audio Interface & Streamer
Featuring a professional quality audio interface and a number of unique real-time effects, the MINISTUDIO Creator delivers everything you need to become the next internet sensation.
- Operation confirmed with major DAW software, including Sonar, ProTools, Cubase, Live, Studio One and GarageBand
- Operation confirmed with major streaming and calling software
- XLR/TRS input jacks support balanced input and can provide +48V phantom power
- Built-in omnidirectional condenser mic
- REVERB knob that can be used to adjust the amount of reverb
- Voice effect on/off button
- 4 sound presets with equalizer and compressor settings
- 5 voice effect presets
- Sampling frequency : 44.1k / 48k / 88.2k / 96k Hz
- Quantization bit rate : 16/24-bit
- USB : USB B-type ×1, USB 2.0 High Speed (480Mbps)
- Dimensions (W×H×D) : 7.87" × 1.57" × 5.1" / 200 × 40 × 130 mm
- Weight : 1.1 lbs. / 500 g
- US-42B MiNiSTUDIO CREATOR × 1
- USB cable × 1
- Owner's Manual (including warranty) × 1
Have an effect
Designed to bring an extra dimension to your podcasts and live streaming, the TASCAM MiNiSTUDIO features three assignable PON sound effect buttons. Use the included bell, buzzer and applause effects or apply your own .wav or .mp3 files for a completely customized experience. You can also set each velocity sensitive PON button to act as a one-shot sound effect, to only play while you press or to loop as long as you hold the button down. Why should the morning DJ's have all the fun?
Find your voice
Diguise your voice, fool your fans! Perhaps the most extreme feature of the MiNiSTUDIO Personal is the Voice Effects option. Simply pressing this innocent little button will instantly transform your voice in any one of a number of amazing and amusing ways. Pitch your voice up into cartoon mouse territory or pitch it down like you've joined the Dark Side. Add a spacey Echo, wobbly Chopper or go old school with the Walki-talkie-approved Radio effect. Voice Effects: crazy, wacky and a whole lot of fun.
Make a production out of it
In addition to the default Easy mode of the TASCAM MiNiSTUDIO software panel is an Expert mode that can be accessed by selecting the tab along the top of the window. This exposes a more comprehensive set of controls that enable you to fine tune EQ, compression and reverb settings as well as customize the behavior of the PON sound effect buttons and the various Voice Effect options. Don't be fooled by the friendly face of the MiNiSTUDIO - underneath the shiny exterior lies a truly professional tool that proudly carries the TASCAM name.
Features at a Glance
- Support for high-resolution recording formats up to 96kHz/24-bit
- Supports Windows (ASIO/WDM) and Mac (Core Audio)
- USB2.0 computer connection
- Compliant with USB Audio 2.0
- Can be connected to an iOS device using an Apple Lightning-USB camera adapter (sold separately).
- USB bus power operation supported when connected to a computer
- Operation confirmed with major DAW software, including Sonar, ProTools, Cubase, Live, Studio One and GarageBand
- Operation confirmed with major streaming and calling software
Hardware functions
- 2 HDDA (High Definition Discrete Architecture) mic preamps
- XLR/TRS input jacks support balanced input and can provide +48V phantom power
- Mini jack mic input (MIC 1)
- Supports connection of 4-pole earphone with mic
- Stereo mini jack AUX input that can be used to connect portable audio players and game devices
- Built-in omnidirectional condenser mic
- Support for low-level dynamic mic input signals
- DSP effects (equalizer, compressor and reverb)
- Input monitoring function allows input sounds to always be heard before they are transmitted
- Stereo analog RCA output jacks suitable for connection to powered monitors
- 3 PON trigger pads that are self-lighting and velocity-sensitive
- REVERB knob that can be used to adjust the amount of reverb
- Voice effect on/off button
- ON AIR button that starts transmission to the computer
- Stereo mini jack headphone output
- 1/4” headphone output
- Separate controls for line and headphone output volumes
- BROADCAST/CREATOR mode switch
Software functions
- Dedicated software has EASY and EXPERT tabs
- Audio files can be assigned to PON trigger pads by dragging and dropping
- Velocity can be turned on/off for PON trigger pads
- PON trigger pad volume adjustment
- PON trigger pad repeat ON/OFF
- PON trigger pad fade in/out setting
- PON trigger pad start time setting
- 4 sound presets with equalizer and compressor settings
- 5 voice effect presets
- Voice effect parameter adjustment
- 5 reverb presets
- Reverb type and parameter setting (HALL/ROOM/LIVE/STUDIO/PLATE)
- Buffer size setting (64/128/256/512/1024) function (Windows only)
- Mic input MONO/STEREO switching (MONO in BROADCAST mode, STEREO in CREATOR mode)
- Transmitted signal MONO/STEREO switching
- ASIO ON/OFF switch that allows mic audio to be transmitted after effect processing (Windows only)
- Loopback function that mixes computer audio with transmitted audio
(automatically OFF in CREATOR mode - PC Audio Out (PC output sound) and Master Out (audio transmitted to PC) volume adjustment
Other features
- Lightweight design convenient for mobile use
- 2 strap attachment points allow commercially-available camera straps to be attached
- Product compliant with RoHS
* Restrictions when connecting iOS/iPadOS devices
- PON trigger pads do not function.
- Effect type settings cannot be changed.
- External power supply is necessary.
- This unit will not provide power to the iOS/iPadOS device.
- You will need an Apple Lightning to USB Camera Adapter (sold separately) for connection.
Find a Local Dealer
LEARN MORE![[Update] Information regarding Windows 11 Version 24H2 compatibility](/wp-content/uploads/images/learn/thumbnail/logo/learn_w_windows_11.jpg){kind=logo}
Support for Your US-42B MiNiSTUDIO CREATOR
Download manuals,
get tutorials, updates and more
Spec Description
| MiNiSTUDIO PERSONAL | MiNiSTUDIO CREATOR | |
| Sampling frequency | 44.1k / 48k / 88.2k / 96k Hz | |
| Quantization bit rate | 16/24-bit | |
| Analog audio inputs | ||
 MIC IN (Top Panel) |
||
| Connectors (Balanced) | XLR-3-31 / 1/4" (6.3mm) TRS Phone Combo jack × 2 (1: GND, 2: HOT, 3: COLD), (T: HOT, R: COLD, S: GND) |
|
| Input impedance | 2.4kΩ | |
| Nominal input level | ||
| VOLUME knob at MAX | –65dBu (0.0004Vrms) | |
| VOLUME knob at MIN | –20dBu (0.0775Vrms) | |
| Gain range | 45dB | |
 MIC IN (Front Panel) |
||
| Connectors (with plug-in power) | 1/8" (3.5mm) 4-pole Mini jack (for headset) × 1 1/8" (3.5mm) Mini jack × 1 |
|
| Input impedance | 5kΩ or more | |
| Gain range | 45dB | |
 Built-in mic |
||
| Type | Omnidirectional Condenser Mic | – |
| Gain range | 45dB | – |
 Instrument inputs |
||
| Connector (Unbalanced) | – | 1/4" (6.3mm) TS Phone jack × 2 (T: HOT, S: GND) |
| Input impedance | – | 1MΩ or more |
| Gain range | – | 45dB |
 External input |
||
| Connector | 1/8" (3.5mm) Stereo Mini jack × 1 | |
| Input impedance | 5kΩ or more | |
| Maximum input level (VOLUME knob at MIN) |
+7.7dBV (2.427Vrms) | |
| Analog audio outputs | ||
| LINE OUT | ||
| Connector | – | RCA Pin jacks × 1 pair |
| Output impedance | – | 200Ω or more |
| Nominal output level | – | –10dBV (0.316Vrms) |
| Maximum output level | – | +6dBV (1.995Vrms) |
| PHONES | ||
| Connectors | 1/4" (6.3mm) Stereo Phone jack × 1 1/8" (3.5mm) 4-pole Mini jack (for headset) × 1 1/8" (3.5mm) Stereo Mini jack × 1 |
|
| Maximum output level | 15mW + 15mW or more (THD+N 0.1% or less, into 32Ω load) | |
| Control I/O | ||
| USB | ||
| Connector | USB B-type ×1 | |
| Format | USB 2.0 High Speed (480Mbps) | |
| DC IN 5V | ||
| Connector | USB Micro B type × 1 | |
| Supported audio drivers | ||
| Windows | ASIO2.0  , WDM |
|
| Mac | Core Audio | |
| iOS device | Core Audio for iPhone | |
| Power | ||
| Used with a computer | USB bus power | |
| Used with an iOS device | USB power adapter (that can supply 5 V and a current of at least 700 mA) *1 External battery pack (that can supply 5 V and a current of at least 700 mA) *2 |
|
| Power consumption | 1W | 1.5W |
| Dimensions (W×H×D) | 5.9" × 1.57" × 5.1" / 150 × 40 × 130 mm | 7.87" × 1.57" × 5.1" / 200 × 40 × 130 mm |
| Weight | 0.84 lbs. / 382 g | 1.1 lbs. / 500 g |
| Operating temperature range | 41˚F to 95˚F / 5˚C to 35˚C | |
| Included items | USB cable , Owner's manual (with warranty) | |
*1 We strongly recommend using the USB power adapter included with the iPad/iPhone. No USB power adapter is included with an iPod Touch.
To use it with an iPod Touch, purchase a genuine Apple USB power adapter (that can supply 5 V and a current of at least 700 mA) separately.
*2 We strongly recommend using a TASCAM BP-6AA external battery pack. If using another external battery pack or mobile battery, purchase one that can supply 5 V and a current of at least 700 mA
Audio performance
| MiNiSTUDIO PERSONAL | MiNiSTUDIO CREATOR | |
| Frequency response | ||
| at 44.1k / 48k Hz | ||
| LINE OUT | – | 20Hz: +0dB/–1dB (MIC IN 1/2, JEITA) 20kHz: +0dB/–1dB (MIC IN 1/2, JEITA) |
| Headphones out (1/4" stereo jack) |
20Hz: +0dB/–1dB (MIC IN 1, JEITA) 20kHz: +0dB/–3dB (MIC IN 1, JEITA) |
20Hz: +0dB/–1dB (MIC IN 1/2, JEITA) 20kHz: +0dB/–3dB (MIC IN 1/2, JEITA) |
| at 88.2k / 96k Hz | ||
| LINE OUT | - | 20Hz: +0dB/–1dB (MIC IN 1/2, JEITA) 40kHz: +0dB/–1dB (MIC IN 1/2, JEITA) |
| Headphones out (1/4" stereo jack) |
20Hz: +0dB/–1dB (MIC IN 1, JEITA) 40kHz: +0dB/–3dB (MIC IN 1, JEITA) |
20Hz : +0dB/–1dB (MIC IN 1/2, JEITA) 40kHz: +0dB/–3dB (MIC IN 1/2, JEITA) |
| Distortion | 0.008% or less (MIC IN 1 → Headphones output, 1kHz sine wave, at nominal input level and maximum output level, JEITA) |
0.005% or less (MIC IN 1/2 → LINE OUT, 1kHz sine wave, at nominal input level and maximum output level, JEITA) |
| S/N ratio | 90dB or more (MIC IN 1 → Headphones output, VOLUME knob at MIN, JEITA) |
100dB or more (MIC IN 1/2 → LINE OUT, VOLUME knob at MIN, JEITA) |
| Crosstalk | 95dB or more (MIC IN 1 → Headphones output, 1kHz sine wave, JEITA) |
95dB or more (MIC IN 1/2 → LINE OUT, 1kHz sine wave, JEITA) |
| Mic amp EIN (equivalent input noise) |
–113dBu or less (150Ω termination, VOLUME knob at MAX) |
–120dBu or less (150Ω termination, VOLUME knob at MAX |
Comparison chart
| MiNiSTUDIO PERSONAL | MiNiSTUDIO CREATOR | |
| Ideal applications | Personal broadcasting, Voice chat | Personal broadcasting, Voice chat, Audio/video creation |
| PON trigger function | ✔ | ✔ |
| Reverb | ✔ | ✔ |
| Voice effects | ✔ | ✔ |
| Loop playback | ✔ (always ON) |
✔ (switched ON/OFF with mode) |
| Portable device (AUX) input | ✔ | ✔ |
| Built-in mic | ✔ | – |
| Number of mic inputs (XLR/TRS jacks) | 1 | 2 |
| Direct guitar input | – | ✔ |
| Mic preamps | High-quality mic preamp | HDDA mic preamps |
| Number of headset mic inputs | 1 | 1 |
| Number of headphone output jacks | 2 | 2 |
| External speaker (line) outputs | – | ✔ |
| Mode switching | – | ✔ |
Information
Update Information
| Latest version info | |
| Software (Windows) | V2.33 |
| Software (Mac) | V2.30 |
| Firmware | V2.30 |
- Bugs with Windows 10 October update (Ver. 1809) such as glitch noises and audio tracks unable to be played have been fixed.
- "Podcast Multi-channel" has been added to the mode presets. (Windows version)
In this preset, you will have access to multiple MiNiSTUDIO Mixing Drivers as input options for your Digital Audio Workstation.
Mixing Driver In1 and In2 will provide connection from the Microphone(s), Mixing Driver In3 and In4 provide direct connection for PON sounds and other PC-generated sounds and Mixing Driver In5 and In6 will provide direct connection from ordinary Internet audio/video communication apps.
When using a DAW, different audio can be recorded to separate tracks, and adjustments can be made independently, allowing you to create podcast. - The Reverb effect can now be turned ON (default) and OFF independently for Mic 1 and Mic 2.
- Scene memories (5 total) have been added.
In addition to the Compressor and EQ, PON settings can also be saved. Different PON assignments can be saved for each scene. - Operation stability has been improved.