TASCAM Engineering team is working on the compatibility verification of the "Windows 10 October 2018 Update" with our products.
Once evaluations are completed, the results will be announced as soon as possible on this page.
Thank you for your patience and understanding through this process.
The results may differ depending on each computer's configuration.
Last update:April 25, 2019
| Result | Product | Firmware | Settings Panel / Driver | Note |
| OK | MiNiSTUDIO CREATOR | V2.30 | V2.33 | |
| OK | MiNiSTUDIO PERSONAL | V2.30 | V2.33 | |
| OK | iXR | V1.02 | V3.00 | |
| OK | US-1x2 | V1.00 | V1.12 | |
| OK | US-2x2 | V1.01 | V2.13 | |
| OK | US-4x4 | V1.01 | V2.13 | |
| OK | US-16x08 New | V2.00 | V3.01 | |
| OK | Celesonic US-20x20 | V2.00 | V3.00 | |
| OK | TASCAM TRACKPACK iXR | V1.02 | V3.00 | |
| OK | TASCAM TRACKPACK 2x2 | V1.01 | V2.13 | |
| OK | TASCAM TRACKPACK 4x4 | V1.01 | V2.13 | |
| OK | UH-7000 | V1.08 | V1.02 | |
| OK | US-322 | V1.03 | V1.04 | |
| OK | US-366 | V1.03 | V1.04 | |
| OK | US-122MKII | V2.03 | V2.05 | |
| OK | US-144MKII | V2.03 | V2.05 | |
| OK | US-1200 | V1.00 | V1.03rc1 | |
| OK | US-1800 | V1.00 | V2.07rc1 | |
| OK | US-100 | - | - | |
| OK | US-125M | - | - | |
| OK | SERIES 102i | V1.00 | V1.00 | |
| OK | SERIES 208i | V1.00 | V1.00 |
| Result | Product | Firmware | Software / Driver | Note |
| OK | DR-05X | V1.00 | V1.00 | |
| OK | DR-07X | V1.00 | V1.00 | |
| OK | DR-40X | V1.00 | V1.00 |
| Result | Product | Firmware | Settings Panel / Driver | Note |
| OK | Model 24 | V1.30 | V1.01 |
| Result | Product | Firmware | Software / Driver | Note |
| Validating | MX-8A | - | - | |
| Validating | 202MKVII | - | - |
Links |
|
|---|---|
|
Celesonic US-20x20 |
|
MiNiSTUDIO CREATOR US-42 |
|
MiNiSTUDIO PERSONAL US-32 |
|
Model 24 |
|
SERIES 102i |
|
SERIES 208i |
|
UH-7000 |
|
US-100 |
|
US-1200 |
|
US-122MKII |
|
US-125M |
|
US-144MKII |
|
US-16x08 |
|
US-1800 |
|
US-1x2 |
|
|
US-20x20 Celesonic |
|
US-2x2 |
|
US-322 |
|
US-366 |
|
US-4x4 |
EN
